-
Structural Detailing Of A Reinforced Concrete Structure - Duplex
-
-
-
CHAPTER ONE
INTRODUCTION
The work in the construction industry involves the client, the Architect, the Engineer, the quantity surveyor and the builders. A structural project is initiated by the Engineer (civil Engineer).
The process of designing begins with the enginer’s appreciation of the client’s requirements. After the specification given to the engineer by architect according to the requirement of the client, the engineer develops different structural schem from the architectural plan and calculated the ultimate bending moment and designed load, which will help him to know te axid C load and neutral axis where the structure is liable to settle and develops sagging or hpgging due to improper use of reinforcement bar. Having considered the use of material and erection methods and then comes up with the final work of full structural analysis and detailed design.
Structural detailing can be defined as the process by which the design of a structural system is drafted in a form that a builder can use for construction for easy establishment.
Also structural drawings are the principle means by which the designer communicates his requirements in a clean and unambiguois manner to the builder.
This project outlines the important components and basic techniques and methods required for structural detailing of a reinforced concrete duplex.
-
-
-
ABSRACT - [ Total Page(s): 1 ]In structural detailing, the project is initiated by the structural engineer. The architectural drawings are prepared by the architect to the required scale and specification given to him by the client.The structural engineer designs the structural frame work of the building and specification required such as slab, beam, column and foundation.For proper clearification and understanding, the structure is broken down into its component parts and detailed keeping in mind the design consideration.St ... Continue reading---
-
ABSRACT - [ Total Page(s): 1 ]In structural detailing, the project is initiated by the structural engineer. The architectural drawings are prepared by the architect to the required scale and specification given to him by the client.The structural engineer designs the structural frame work of the building and specification required such as slab, beam, column and foundation.For proper clearification and understanding, the structure is broken down into its component parts and detailed keeping in mind the design consideration.St ... Continue reading---
CHAPTER ONE -- [Total Page(s) 1]
Page 1 of 1
CHAPTER ONE -- [Total Page(s) 1]
Page 1 of 1