-
The Cost Of Gasoline And The Negative Effect
CHAPTER ONE -- [Total Page(s) 2]
Page 2 of 2
-
-
-
Filter Lock
Combination fuel fitter and safety-off
Fuel Controller
Common term used to describe a unit which contain an atmospheric zero governors.
Fuel Filter
Unit placed in a fuel line to remove dirt and rust picked from the tank or service fittings
Heavy Ends
This is a residue picked up by propane from lubricated values and compressors. It will sometimes collect inside the fuel controller where the pressure is sub-atmosphere.
Idle Plate
A template inserted between the carburetor and the engine to obtain a vacuum source or provide an idle gas inlet.
Liquid Withdrawal
Used to describe fuel system where the fuel is drawn from the liquid section of the storage tank.
Lock Off Value
A device either electrically or vacuum operated to positively shut off the flow of fuel if the engine should fail while unattended.
Primer
A feature included on most zero governors, allow fuel prior to cranking the engine as a starting aid
Regulator
This term applies to the pressure reducing device or section in fuel system that reduces the tank pressure down to the rated inlet pressure required by the atmospheric zero governor or pressure carburators.
Solenoid Value
An electrically operated shut-off device used in connection with a manifold sensing vacuum switch or oil pressure switch to positively shut-off the flow of fuel should engine fail
Spud-In
A method used to convert a gasoline carburetor to gaseous fuel by placing a tube at the small section of the venture.
Vapor Withdrawal
Describe a fuel system where the fuel is drawn from the vaporized gas section of the storage tank.
Vaporized-Regulator
A device which includes a regulator and a heat exchange to convent liquid propane to gaseous state and reduce the pressure these devices with sometimes include zero governor are called converters.
Venturl
A symmetrical restriction in the intake manifold or carburetor which produces a pressure drop (vacuum) and drows fuel into the air stream the amount of fuel drawn in is proportional to the volume and speed of the air passing through the venture.
Zero Governor
This unit is sometime called fuel controller or secondly it is a vacuum demand.
Purpose And Scope Of Generator Conversion Kit
The purpose of conversion kit is to convert generating set to that which can run propane and natural gas.
Objective to Fabricate a Generator Gas Conversion
Kit for Home and Industrial Generator
To educate student and researchers on the use of conversion kit and the technology behind the generation of electricity with the use propane and natural gas.
CHAPTER ONE -- [Total Page(s) 2]
Page 2 of 2
-
-
ABSRACT - [ Total Page(s): 1 ]ABSTRACT COMING SOON ... Continue reading---
CHAPTER TWO - [ Total Page(s): 1 ]CHAPTER TWOTYPES OF GENERATOR CONVERSION KITSA & C Conversion Kit A & C kits comes with a “zero governor†that acts as its own shut-off device. Think of the engine regulator as a glass of milk and rubber hose from the regulator as a drinking straw. If you put a straw into a glass of milk, up the straw. That is how the zero governor functions. When the engine is running and air is passing through the carburetor or adapter, the fuel is drawn out of the regulator through the rubbe ... Continue reading---
CHAPTER THREE - [ Total Page(s): 3 ]SPRING A well coiled spring of about 1.5mm thickness helps conversion kit to open and close the gas inlet and outlet and allow the gas to escape through the controllers to the engine.GASKETGasket helps in the A&C conversion kit to be out tight, it those not allow the escape of gas inside the controller.BOTTS: M5 and M10 bolts were used for the tightening of the conversion kits.GAS INLET NIPPLE: A stainless material at the bank of the kit that allows the entry of gas to the controller.GAS OUTLET ... Continue reading---
CHAPTER FOUR - [ Total Page(s): 1 ]CHAPTER FOURHOW TO CONVERT PORTABLE GENERATOR TO PROPANE GAS 4.1 ADVANTAGE OF RUNNING HOME GENERATOR ON PROPANE GAS There are many advantages in running home generator on propane gas. Propane burns cleaner than gasoline, it does not leave carbon deposits on the engine and plugs. You can also start the generator at idle, instead of full throttle, because propane is already a gas, it does not break down as it sits, so it would not gurn up to fuel system.4.2 HOW TO INSTALL A PROP ... Continue reading---
CHAPTER FIVE - [ Total Page(s): 1 ]CHAPTER FIVE CONCLUSION AND RECOMMENDATION 5.1 CONCLUSION In the designing and fabrication of this project, titled design and fabrication of generator conversion kit using aluminum material. The design is economic and technological soundness when taking into consideration, the durability and the behavior of the material used under the application were also put into consideration. 5.2 RECOMMENDATI0N To provide lasting solution to a particular problem through course work and pr ... Continue reading---
