-
Evaluation Of Mechanical Properties Of Palm Oil Fuel Ash (pofa) Blended – Granite - Gravel Concrete
REFRENCES -- [Total Page(s) 2]
Page 1 of 2
-
-
-
REFERENCES
Altwair, N.M., Johari, M.A.M. and Hashim, S.F.S., 2013. Influence of treated palm oil fuel ash on compressive properties and chloride resistance of engineered cementitious composites. Materials and Structures, 47(4), pp.667–682. Aprianti, E.,
Shafigh, P., Bahri, S. and Farahani, J.N., (2015). Supplementary cementitious materials origin from agricultural wastes - A review. Construction and Building Materials, 74, pp.176–187.
Asrah, H., Mirasa, A.K. and Mannan, A., (2015). The Performance of Ultrafine Palm Oil Fuel Ash in Suppressing the Alkali Silica Reaction in Mortar Bar. International Journal of Engineering and Applied Science, 2(9), pp.60–66.
Alsubari, B., Shafigh, P. and Jumaat, M., (2015). Development of Self-Consolidating High Strength Concrete Incorporating Treated Palm Oil Fuel Ash. Materials, 8(5), pp.2154–2173.
Alsubari, B., Shafigh, P. and Jumaat, M.Z., (2016). Utilization of high-volume treated palm oil fuel ash to produce sustainable self-compacting concrete. Journal of Cleaner Production.
Aprianti, S.E., (2016) A Huge Number of Artificial Waste Material can be Supplementary Cementitious Material (SCM) for Concrete Production – A review Part II. J. of Cleaner Production. Elsevier Ltd. 142, 4178-4194
Awal, A.S.M.A., and Shehu, I.A., (2013) “Evaluation of heat of hydratio of concrete containing high volume palm oil fuel ash. Fuelâ€, 105, 728-731
Ahmad M. H., Omar R. C., Malek M. A., Noor N & Thiruselvam, S., (2008) “Compressive Strength of Palm Oil Fuel Ash Concreteâ€, ICCBT 2008 - A - (27) – pp297 – 306.
Ahamed. V.S, (2016) “Study of strength of concrete with palm oil fuel ash as cement replacementâ€. International Journal of Civil Engineering and Technology. Volume 7, Issue 3,, pp. 337–341,
Altwair, N.M., Azmi, M., Johari, M. and Hashim, S.F.S., (2011). Strength Activity Index and Microstructural Characteristics of Treated Palm Oil Fuel Ash. International Journal of Civil & Environmental Engineering, 11(October), pp.85 – 92.
ASTM, D. 854-00. (2000). Standard test methods for specific gravity of soil solids by water pycnometer. Annual Book of American society of testing Materials Standards, 4, 08.
Awal, A.S.M.A. and Shehu, I.A., (2015). Performance Evaluation Of Concrete Containing High Volume Palm Oil Fuel Ash Exposed To Elevated Temperature. Construction and Building Materials, 76, pp.214–220.
Bahurudeen, A., Kanraj, D., Gokul D.V., and Santhanam, M., (2015) Performance evaluation of sugarcane bagasse ash blended cement in concrete. Cement and Concrete Composites, 59, 77-88
Brasileiro, G.A.M., Vieira, J.A.R., and Barreto, L.S., (2013) Use of coir pith particles in composites with Portland cement. J. of Environmental Management, 131, 228-238
BS EN 197-1 (2011) CEM II and CEM V cement for production of low carbon concrete [Online]. Accessed 8th April, 2019 available at< https://www.sciencedirect.com/science/article/abs/pii/S0950061814009738?
BS EN, B. (2009). 12390-3: (2009). Testing hardened concrete. Compressive strength of test specimens, 12390-5.
Chindaprasirt, P. and Rukzon, S., (2009). Pore Structure Changes of Blended Cement Pastes Containing Fly Ash, Rice Husk Ash, and Palm Oil Fuel Ash Caused by Carbonation. Journal of Materials in Civil Engineering, Vol. 21; N(November), pp.666–671.
Chindaprasirt, P., Homwuttiwong, S. and Jaturapitakkul, C., (2007). Strength and Water Permeability of Concrete Containing Palm Oil Fuel Ash and Rice Husk-bark Ash. Construction and Building Materials, 21(7), pp.1492–1499.
Hwang, C.L., Bui, L.A.T., Lin, K.L. and Lo, C.T., (2012), Manufacture And Performance Of Lightweight Aggregate From Municipal Solid Waste Incinerator Fly Ash And Reservoir Sediment For Self-Consolidating Lightweight Concrete. Cement and Concrete Composites, 34(10), pp.1159–1166
Han, J., Wang, K., Shi, J., and Wang, Y., (2015) Mechanism of triethanolamine on Portland cement hydratio process and microstructure characteristics. Construction and Building Materials, 93, 457-462
Hussin W.M., Awal A.S.M., (2011) “Effect of Palm Oil Fuel Ash in Controlling Heat of Hydratio of Concreteâ€, Procedia Engineering, Vol.14 , 2011, pp. 2650–2657.
REFRENCES -- [Total Page(s) 2]
Page 1 of 2
-
-
ABSRACT - [ Total Page(s): 1 ]ABSTRACTUtilizing Palm Oil Fuel Ash (POFA) in concrete mix is a major way of turning waste to wealth. Gravel as an aggregate is cheaper than granite. Thus, obtaining an optimum combination of these materials in achieving a maximum compressive strength in concrete will go a long way in helping the construction industry.The study was carried out to establish an optimum replacement ratio for Palm Oil Fuel Ash (POFA) blended granite-gravel of concrete. Uniform water/binder (w/b) ratio of 0.5 and mix ... Continue reading---
LIST OF TABLES - [ Total Page(s): 1 ]LIST OF TABLESTable 2. 1: Chemical composition range of OPC and POFA Table 2. 2: Chemical composition analysis in POFA Table 2. 3: Compressive strength of concrete with various percentages of POFA Table 2. 4: Tensile strength of concrete by the addition of various % of POFA Table 3. 1: Concrete mix design based on design expert Table 4. 1: Oxides composition of POFA Table 4. 2: Fine sand grain size distributions from sieve analysis Table 4. 3: Granite size distributions from sieve analysis T ... Continue reading---
LIST OF FIGURES - [ Total Page(s): 1 ]LIST OF FIGURESFigure 2. 1: Strength versus UPV Figure 2. 2: Compressive strength versus POFA replacement percentage Figure 2. 3: Strength activity index of POFA mortar Figure 2. 4: Relationship between UPV and replacement percentage Figure 2. 5: Slump flow against POFA percentage Figure 2. 6: Relationship between porosity and POFA content Figure 2. 7: Relationship between strength and porosity of 80% content of POFA mortar Figure 2. 8: relationship between permeability and replaceme ... Continue reading---
TABLE OF CONTENTS - [ Total Page(s): 1 ]TABLE OF CONTENTSCERTIFICATION DEDICATION ACKNOWLEDGEMENT LIST OF TABLES LIST OF FIGURES ABSTRACT CHAPTER ONE INTRODUCTION 1.1 Background of the study 1.2 Scope 1.4 Justification 1.5 Statement of Problem 1.6 Aim 1.7 Objectives CHAPTER TWO LITERATURE REVIEW 2.1 Properties of concrete with POFA 2.1.1 Physical properties 2.1.2 Chemical Properties of POFA 2.1.3 Mechanical properties of POFA 2.2 Compressive St ... Continue reading---
CHAPTER ONE - [ Total Page(s): 2 ]CHAPTER ONEINTRODUCTION1.1 Background of the study Concrete is regarded as the primary and widely used construction ingredient around the world in which cement is the key material. However, large scale cement production contributes greenhouse gases both directly through the production of CO2 during manufacturing and also through the consumption of energy (combustion of fossil fuels). Moved by the economic and ecological concerns of cement, researchers have focused on finding a subs ... Continue reading---
CHAPTER TWO - [ Total Page(s): 9 ]However, POFA contribute to its long-term strength due to the continuous pozzolanic reaction because of the fine particle size, the greater glassy phase of SiO2 and the reduced composition of carbon (Zeyad et al., 2012). This is also proved by Altwair et al. (2011) using the strength activity index which is the ratio of the strength of SCM-cement mortar to cement mortar at specific curing time. 2.3 Ultrasonic Pulse Velocity (UPV) of Concrete with Replaced POFA According to Kanadasan & ... Continue reading---
CHAPTER THREE - [ Total Page(s): 7 ]Where W1 = Weight of empty flask W2 = Weight of empty flask + Cement W3 = Weight of empty flask+ Cement + Kerosene W4 = Weight of empty flask+ Kerosene 0.79 = Specific Gravity of Kerosene3.2.3 Aggregate Specific Gravity Determination The test was based on ASTM D 854-00 (2000) – Standard Test for Specific Gravity of Aggregate by Water Pycnometer. The experimental procedure is as follows:Determined and recorded the we ... Continue reading---
CHAPTER FOUR - [ Total Page(s): 15 ]Figure 4.2 shows effect of granite and POFA mix ratio on compressive strength of concrete. The graph shows that, the increase in granite volume led to increase in compressive strength. However, increase in POFA percentage led to decrease in compressive strength. It can be observed that, the highest compressive strength was achieved at 25% POFA replacement and lowest at 35% replacement. Also, for granite highest and lowest compressive strength were achieved at 100% and 0% replacement respectively ... Continue reading---
CHAPTER FIVE - [ Total Page(s): 1 ] CHAPTER FIVECONCLUSION AND RECOMMENDATIONS5.1 Conclusion The study determined the compressive strength of granite-gravel concrete at varying replacement of Palm Oil Fuel Ash (POFA) at different curing ages. Also, established an optimum replacement of Palm Oil Fuel Ash (POFA) blended granite-gravel. Therefore, the following conclusions were drawn:1. The increase in granite volume led to increase in compressive strength. However, increase in POFA percentage led to decrea ... Continue reading---
