-
Design And Implementation Of Intruder Detector Alarm System With Location
CHAPTER ONE -- [Total Page(s) 2]
Page 2 of 2
-
-
-
The entire system is designed in such a manner that whenever somebody
wants to gain entrance through the back door, the electronic eyes
(optocoupler) installed at the locations respectively senses the
presence and triggers a buzzer alarm at the security department of the
cantonment and seven-segment display shows the exact location of the
intruder.
1.3 Aim and Objectives of the Project
1. The
major aim of this project is to design and implement a microcontroller
based multipurpose security device with direction capable of securing a
military cantonment from intruder location and detection and to control
access to a strong room in the cantonment.
2. Another objective
of this project is to ground the graduating student in electronic
system design and implementation involving Random logic.
3.
This project is also aimed at acquainting the young engineers with
skills for engineering, technical and scientific writing which is very
indispensable in their professional practice.
4. Another aim of
this project is to familiarize these graduating students with
electronic system designs that have real life application in industrial
security.
1.4 Project Significance
The project construction
work is used in a number of places like in a military cantonment to
provide security against enemies, fire-outbreak and unauthorized access
into their strong room, bank strong room doors to avoid intruders;
another vital application of this project is in office doors, and in
modern buildings. Also this project is for security surveillance in
combination with closed circuittelevision (CCTv). The project of this
nature can also be used in JAMB and WAEC strong room doors.
1.5 Scope of the Study
This
project is focused on the design and implementation of intruder
detector alarm system with location. It covers the following: light
dependent Resistor, Seven segment display and other passive and active
components used in the design. It also elaborates the mode of
calculation of certain circuit parameter used in the system design.
1.6 Project Report Organization
The
realization of this project is presented in chapters for clarity
purpose. Chapter one contains a brief introduction to the project.
Chapter two is titled as the literature review, while chapter three is
the system design. Chapter four exposes the Implementation and mode of
construction, chapter five is testing and integration, problems
encountered, recommendation and conclusion.
CHAPTER ONE -- [Total Page(s) 2]
Page 2 of 2
-
