-
Construction Of A Gsm Based Home Automation Using Avr
CHAPTER ONE -- [Total Page(s) 3]
Page 2 of 3
-
-
-
1.3 PROBLEM STATEMENT
Technology has advanced so much in the last
decade or two that it has made life more efficient and comfortable. The
comfort of being able to take control of devices from one particular
location has become imperative as it saves a lot of time and effort.
Therefore there arises a need to do so in a systematic manner which we
have tried to implement with our system. The system we have proposed is
an extended approach to automating a control system. With the
advancement and breakthroughs in technology over the years, the lives of
people have become more complicated and thus they have become busier
than before. With the adoption of our system, we can gain control over
certain things that required constant attention. The application of our
system comes in handy when people who forget to do simple things such as
turn ON or OFF devices at their home or in their office, they can now
do so without their presence by making a call from their mobile phone.
This development, I believe, will ultimately save a lot of time
especially when people don’t have to come back for simple things such as
to turn OFF switches at their home or at their office once they set out
for their respective work.
1.4 AIMS AND OBJECTIVES
The objective
of this project is to develop a device that can automatically regulate
power surge in the home and allow its users to remotely control and
monitor multiple home appliances using a cellular phone. This system is a
powerful and flexible tool that will offer this service at any time,
and from anywhere with the constraints of the technologies being
applied. Possible target appliances include (but are not limited to)
climate control system, security systems, lights; anything with an
electrical interface.
The proposed approach for designing this system
is to implement a microcontroller-based control module that receives
its instructions and command from a cellular phone over the GSM network.
The
project “GSM based home automation using AVR†as the title suggests is
aimed to construct a control system that enables the complete control of
the interface on which it is based.
General objectives of the project are defined as;
ï‚· To co-ordinate appliances and other devices through phone call.
ï‚· To effectively receive and transmit data via phone call
ï‚·
To eliminate the need of being physically present in any location for
tasks involving the operation of appliances within a household/office.
ï‚· Minimize power and time wastage
CHAPTER ONE -- [Total Page(s) 3]
Page 2 of 3
-
-
ABSRACT - [ Total Page(s): 1 ]With advancement of technology things are becoming simpler and easier for us. Automatic systems are being preferred over manual system. The purpose of this project is to design and construct A GSM based home automation using AVR. Using GSM networks, in this project a home power control system has been proposed that will act as an embedded system which can monitor and control appliances and other devices locally using built-in input and output peripherals. The system has a delay of 2 minutes afte ... Continue reading---
