• Fabrication Of Electrical Pop Corn Machine

  • CHAPTER TWO -- [Total Page(s) 2]

    Page 2 of 2

    Previous   1 2
    • 2.4 Various types of heating element ¬Analysis of     alternatives
          Popcorn is a favourite American snack. The salty favorite is what people crave. Popcorn in sold already popped in many places. You can find it at movie theatres, road side stands and several celebrations. Nowadays, you can buy pop corn in large variety of flavours like butter, cheese and caramel to name a few. Pop corn is an in expensive treat that is fun to share with a group of people
      You can make pop corn yourself in many different ways:
          A pan with lid on it
          Microwave pop corn
          Hot air pop corn machine
          Electrical operated pop corn machine
      2.4.1 A pan with lid it
            A pan with a lid on it can serve to make a nice batch of pop corn. by just putting a couple tables spoons of oil in the pan and a quarter cup of pop corn seed in the pan with the oil you can make your own batch of pop corn. Make sure you keep the lid on the pop corn while it is popping or you could have mess or get hurt.
      2.4.2 Microwave Popcorn
          Microwave popcorn is a popular way to make popcorn. You can buy it in pre mixed packages. Microwave popcorn can be brought in many flavours and it is very easy to make just pop the package in your microware and follows the instruction on the package in just a minute or two, then, you can have some popcorn.
       
       
      2.4.3 An open fire Popcorn.
          If you want to pop some popcorn while you are out camping over an open fire, you can buy the kind of popcorn that comes in a pan already to pop. This popcorn has an aluminum foil cover and it is extremely fun to pop. As the popcorn pops, it makes the aluminum foil rise so it is very entertainting. It is tasty as well as fun.
          If you want to popcorn over an open fire and you do not have a pre made pan of popcorn, you can take a large flat rock and put it in the centre of your fire, put some popcorn  on the rock and when the rock gets hot then the  popcorn will pop. There is a lot wasted in making popcorn with this method because you can only eat the popcorn that flies out of the fire. It can be dangerous as well because you never can tell where the popcorn will fly as it shouts out of the fire.
      I do not recommend this method of making popcorn. But i have heard it is fun.
       
      2.4.4 Hot Air Pop Corn Machine.
          Pop corn that is popped in a hot air popper is the best pop corn for your health Its made of an air pop corn machine that uses no fat to pop the corn in which you can add your own flavours to air popped popcorn. It is tasty, and easy to make but you need to have an air popper to make it.
      2.4.5 Manually Operated Popcorn Machine.
          This is also a machine that produce popcorn operated manually, where it stirrer rod being rotating manually, the machine being fabricate by joining some materials together to give a workable machine that is producing popcorn, it has a frame as well as a pot which is made by aluminum, where the popcorn is being popped.
           The oil is being poured into the pot which is being heated, then the pot which is being poured, as the popcorn pop, it will be ready to cat.
      2.4.6 Eclectically Operated Popcorn Machine
          This is being fabricated in a way that manually operated pop corn machine is being fabricated  but is being operated electrically by using transformer, diode, to step down the 220v electricity to the lower voltage of the stirrer monitor motor, so that the stirring will be okay, this does not need much human effort, it has two main part, which are the pot, and the body frame and it is operated electrically and it produced good and nice popcorn and produce much popcorn for the commercial purpose.
      2.4.7 Best Of The Project
          Electricity operated popcorn machine is being choose as the best of the project, because it is operated electrically.
  • CHAPTER TWO -- [Total Page(s) 2]

    Page 2 of 2

    Previous   1 2
    • ABSRACT - [ Total Page(s): 1 ]ABSTRACTIron pop corn machine has being a machine that is fabricated to produce a large and reasonable amount of pop corn with a limited cost and of fast rate it is economical as it is known to be for average Nigerians and also as appetizer to meet the demand of the consumer, invention of this machine at very economical rate, its source of heat is an electric burner, with a very moderate height and a detachable aluminum pot and container to collect the pop corn, the fabrication  of the pop corn ... Continue reading---

         

      TABLE OF CONTENTS - [ Total Page(s): 1 ]TABLE OF CONTENTS Title Page    Certification   Dedication  Acknowledgement      Abstract  Table of contents  CHAPTER ONEINTRODUCTION 1.1    The Background of the Project   1.2    Literature Review    1.3    Specification of Problems  1.4    Requirement of Design     1.5    Condition for Use       1.6    Characteristics    1.7    Appearance    CHAPTER TWO2.1 Description of component part   2.2 Body frame work      2.3 Material needed fo ... Continue reading---

         

      CHAPTER ONE - [ Total Page(s): 1 ]CHAPTER ONEINTRODUCTION1.1    The Background of The ProjectThe basic aim of this project is to improve the quality and standard of production of a pop-corn machine and how its producing the popcorn.     Therefore, it act or promote and improve production rate and limit the frying time, as much as it could performed and lastly production it in a sanitary condition.    The design and construction of pop corn machine is brought from the perspective of its availability in market.Also this p ... Continue reading---

         

      CHAPTER THREE - [ Total Page(s): 1 ]CHAPTER THREE3.1 Assembly    Assembly is a way of fussing or coupling split parts together to become whole.    Assembly procedure of this project goes thus: - After work has been completed on the source of heat supply (electric burner). The aluminum pot, the pot was designed on where to sit which is bolted i.e couple together with the electric burner for its operation.    The means of assembling by bolting or riveting makes it more turn to both pot and sources of heat. The container of ... Continue reading---

         

      CHAPTER FOUR - [ Total Page(s): 1 ]CHAPTER FOUR 4.1    PrecautionsAccident can be defined as an unexpected, unplanned and unpredicted event, which could cause loss of life, damage of properties and stoppage of work Safety can also be defined as freedom from accident. The following precaution are put in place when operating the machine.     Touching of hot pot during processing is not advisable     Line wire must not be touched with unprotected hands.     Broken glasses and frame should be properly disposed. 4.2    ... Continue reading---

         

      CHAPTER FIVE - [ Total Page(s): 1 ]CHAPTER FIVECONCLUSION AND RECOMMENDATIONS5.1     Conclusion     After testing the machine, we discovered that we are able to pop higher amount of popped coin due to the fact that pot is bigger than the previous ones constructed.     Stirrer touches all the botton part of the pot     A detachable container is constructed so as to reduce the wastage of pop-corn when transferring from pot to the containers. Also my conclusions give me the room for production of high demand of pop-corn ... Continue reading---

         

      REFRENCES - [ Total Page(s): 1 ]REFERENCES Abdul Qadir, B.L (2010) strength at materials “I” Edition, Published by SMS published and printing enterprises, Ilorin page1-20, page 37/38.(P.N OKEKE and M.W Anyakqwha (1987&1989), Senior Secondary School Physics, Revised Edition, Macmillan Education LTD, London and Basingstoke, page 17.R.A Higgins, (1994) “Properties of engineering materials” Second Edition, Edward Arnold, a division of Hodder Headline PLC, 338 Euston Road, London, page 378. ... Continue reading---