-
Fabrication Of Electrical Pop Corn Machine
-
-
-
CHAPTER FIVE
CONCLUSION AND RECOMMENDATIONS
5.1 Conclusion
After testing the machine, we discovered that we are able to pop higher amount of popped coin due to the fact that pot is bigger than the previous ones constructed.
Stirrer touches all the botton part of the pot
A detachable container is constructed so as to reduce the wastage of pop-corn when transferring from pot to the containers.
Also my conclusions give me the room for production of high demand of pop-corn
5.2 Recommendation
From the experience and the operation carried out during the process of this project is here by Recommended that, process of the pop corn machine is made to be electrically operated for popping of corn.
Also, in order to improve effective and high standard reputable project, continue improvement should be constantly made
It is recommended that project for every out going student should make it in a way such that it will meet the standard of improved ones.
The container should be well lagged so that heat transfer by conductive from the heating element will be reduce.
The polytechnic and departmental authority should make more buildings available necessary machine and the maintenance of this machine for engineering student should be provided. Most especially the Mechanical Engineering student.
In view of the problems, recommendation and suggestions can be made, that the institution authority should build more workshop and provide necessary and enough equipment and machines because it is my hope that this project would meet the needs of students, industries and other research centre in their quest for basic training on production, fabrication and operations of pop corn machine.
-
-
-
ABSRACT - [ Total Page(s): 1 ]ABSTRACTIron pop corn machine has being a machine that is fabricated to produce a large and reasonable amount of pop corn with a limited cost and of fast rate it is economical as it is known to be for average Nigerians and also as appetizer to meet the demand of the consumer, invention of this machine at very economical rate, its source of heat is an electric burner, with a very moderate height and a detachable aluminum pot and container to collect the pop corn, the fabrication of the pop corn ... Continue reading---
TABLE OF CONTENTS - [ Total Page(s): 1 ]TABLE OF CONTENTS Title Page Certification Dedication Acknowledgement Abstract Table of contents CHAPTER ONEINTRODUCTION 1.1 The Background of the Project 1.2 Literature Review 1.3 Specification of Problems 1.4 Requirement of Design 1.5 Condition for Use 1.6 Characteristics 1.7 Appearance CHAPTER TWO2.1 Description of component part 2.2 Body frame work 2.3 Material needed fo ... Continue reading---
CHAPTER ONE - [ Total Page(s): 1 ]CHAPTER ONEINTRODUCTION1.1 The Background of The ProjectThe basic aim of this project is to improve the quality and standard of production of a pop-corn machine and how its producing the popcorn. Therefore, it act or promote and improve production rate and limit the frying time, as much as it could performed and lastly production it in a sanitary condition. The design and construction of pop corn machine is brought from the perspective of its availability in market.Also this p ... Continue reading---
CHAPTER TWO - [ Total Page(s): 2 ]CHAPTER TWODESCRIPTION OF THE COMPONENT PARTS AND WORKING PRINCIPLE2.1 Description of Components Parts This comprises of the main body itself i.e the part and the equipment used in constructing the pop corn machine. Four legs -: this serve as lifting mechanism Sitting portion of the pot Aluminium pot-: this is the uppermost of the pot that is accommodating the com-steering Element:this is caled electric burner. Support pipe, steering pot and the stirrer 2.2 ... Continue reading---
CHAPTER THREE - [ Total Page(s): 1 ]CHAPTER THREE3.1 Assembly Assembly is a way of fussing or coupling split parts together to become whole. Assembly procedure of this project goes thus: - After work has been completed on the source of heat supply (electric burner). The aluminum pot, the pot was designed on where to sit which is bolted i.e couple together with the electric burner for its operation. The means of assembling by bolting or riveting makes it more turn to both pot and sources of heat. The container of ... Continue reading---
CHAPTER FOUR - [ Total Page(s): 1 ]CHAPTER FOUR 4.1 PrecautionsAccident can be defined as an unexpected, unplanned and unpredicted event, which could cause loss of life, damage of properties and stoppage of work Safety can also be defined as freedom from accident. The following precaution are put in place when operating the machine. Touching of hot pot during processing is not advisable Line wire must not be touched with unprotected hands. Broken glasses and frame should be properly disposed. 4.2 ... Continue reading---
REFRENCES - [ Total Page(s): 1 ]REFERENCES Abdul Qadir, B.L (2010) strength at materials “I†Edition, Published by SMS published and printing enterprises, Ilorin page1-20, page 37/38.(P.N OKEKE and M.W Anyakqwha (1987&1989), Senior Secondary School Physics, Revised Edition, Macmillan Education LTD, London and Basingstoke, page 17.R.A Higgins, (1994) “Properties of engineering materials†Second Edition, Edward Arnold, a division of Hodder Headline PLC, 338 Euston Road, London, page 378. ... Continue reading---
-
ABSRACT - [ Total Page(s): 1 ]ABSTRACTIron pop corn machine has being a machine that is fabricated to produce a large and reasonable amount of pop corn with a limited cost and of fast rate it is economical as it is known to be for average Nigerians and also as appetizer to meet the demand of the consumer, invention of this machine at very economical rate, its source of heat is an electric burner, with a very moderate height and a detachable aluminum pot and container to collect the pop corn, the fabrication of the pop corn ... Continue reading---
CHAPTER FIVE -- [Total Page(s) 1]
Page 1 of 1
CHAPTER FIVE -- [Total Page(s) 1]
Page 1 of 1