-
Design And Fabrication Of Wood Lathe Machine
CHAPTER ONE -- [Total Page(s) 4]
Page 2 of 4
-
-
-
A. CENTER LATHE MACHINE
A center lathe is used to
machine metals, by rotating the work fierce mounted between centers
against a cutting tool. The tool can be fed both transversely and
longitudinally with respect to the turning axis of the job. The tool
can be operated manually or automatically and many shapes as well as
different works can be done on the center lathe. Such work as
cylindrically, eccentric or conical shape can be machined. Also done on
the center lathe are threading turning and boring operations.
B. CERAMIC LATHE MACHINE
The ceramic – lathe is used for ceramic machining along, though the
operation is similar to that of the center lathe.
C. WOOD LATHE
The wood lather, just like other types of lather, it can be used to
carry out a wide range of machining operations, it saves time and does
not wed much ski //s as in the use of hand tools.
1.4 DIMENSIONS AND SPECIFICATIONS
Below are the dimensions and specifications as regards t the fabricated wood lathe.
1. Total length of the machine
2. Total height of the machine
3. Width of the machine bed
4. Angle of inclination of the tail stock
5. The electric motor RPM
Frequency
Power
Voltage
Current
Capacity
CHAPTER ONE -- [Total Page(s) 4]
Page 2 of 4
-
-
ABSRACT - [ Total Page(s): 1 ] To achieve the aim of producing a functional and efficient wood lathe machine. We analyzed and as well synthesized the different possible design solutions and concepts. We carried out the analysis of different component part of the machine to determine their suitable dimensions based on loading and stresses due to them. We used available local material and tool from a private workshop. We also made use of some machine tools in the school workshop. Finally, the parts were assemble and t ... Continue reading---
