-
Fabrication Of Twin Panel Metal Door
-
-
-
The Big Door
Area (A) = Length x Breadth
= 900 x 37.5 (mm)
= 33,750mm2
= 33.75mm3
Mass (m) = Density x Volume
Volume (V)= Area x Panel thickness
= 33,750mm^2 x 2mm
= 67,500mm3
= 67.5m3
Mass (m)= 7850kg/〖m 〗^3 x 67.5m3
= 529875
= 529875g
= 529.875 x 1010^3 g
Weight = Mass x Acceleration due to gravity
= 529875kg x 9.8m/s2
= 5192.78 x 108N
3.4 The Whole Door
Total Area (AS)= A small + A Big
= 11,250mm^2 + 33,750mm2
= 45,000mm^2 or 45m2
Total Mass= M small + M Big
= 175.625kg + 529.875 x 103kg
= 530051.625
Total weight = W Small + W Big
= 1730.9N + 5192.78 x 103N
= 5194501.9N
= 5194.5109KN
-
-
-
ABSRACT - [ Total Page(s): 1 ]ABSTRACTPrivacy and security are major essential human needs in various houses, offices etc. ability to afford quality door and high long life span at an affordable price to an average Nigerian has been a problem. This project is aimed at fabrication of a double panel door which is capable of giving maximum security to life and properties. The locally available material (mild steel) of different shapes, sizes and forms was used with available indigenous technology without compromising the standa ... Continue reading---
LIST OF TABLES - [ Total Page(s): 1 ]LIST OF TABLESTable 3.1 Selection of Materials Table 4.1 Fabrication Details ... Continue reading---
TABLE OF CONTENTS - [ Total Page(s): 1 ]TABLE OF CONTENTSTitle page Certification Declaration Dedication Acknowledgment Abstract Table of contents CHAPTER ONE: 1.0 Introduction 1.1 Objectives of the project 1.2 The need for Door 1.3 Types of Door 1.4 Justification CHAPTER TWO;2.0 Literature Review 2.1 Analysis of Alternative Door 2.2 Choice of Alternative 2.3 Types of Metal CHAPTER THREE:3.0 Materials and Const ... Continue reading---
CHAPTER ONE - [ Total Page(s): 1 ]CHAPTER ONE1.0 INTRODUCTIONDoor is a movable structure that is used as a means of closing off entrances for security purpose and also for the beautification of the area. In the ancient time, doors were not used and the people of then live comfortably in peace since there is trustworthiness among them, but as time goes on, some people gang up to become an enemy of progress, they started stealing another people’s properties and also terminate their live. This brings the people of thos ... Continue reading---
CHAPTER TWO - [ Total Page(s): 2 ]i. Leather DoorThis is the door that is made from leather to prevent unwanted access to an apartment and to reduce the rate of penetration of sunlight.The frame and panel is made of wood and the leather is wrapped round the panel. The panel is joined to the frame with the aid of hinges for adequate movement of the door and also to allow for easy opening and closing of the door.ii. Wooden DoorDue to the fact that doors made from leather does not guarantee unwanted access ... Continue reading---
CHAPTER FOUR - [ Total Page(s): 4 ]It is used to grip job tightly when fuling, bending, tapping and when cutting operation are to carried out. This is bolted to the work bench.Try SquareIt is used for checking square of metal, and for measuring and checking right angles.It is used for drawing lines on metals for making lines on the metals.Hack SawHack saw are used for cutting dimension.Steel RuleSteel rule are use for taking dimensionMachine UsedDifferent types of machines were used during the construction of this project. Thes ... Continue reading---
CHAPTER FIVE - [ Total Page(s): 1 ]CHAPTER FIVE5.0 CONCLUSION AND RECOMMENDATION5.1 ConclusionAll the theoretical class work without a related practical work particularly in course of technology like engineering is useless and inadequate because it lies in the treasure of the skill needed to succeed as an engineering student. In this respect, we commend the effort of the institution for the imposition of project in the curriculum before the fulfillment of national diploma programme.This project had ready exposed the w ... Continue reading---
REFRENCES - [ Total Page(s): 1 ]REFERENCESM. Nelkon (1951) “Calculation of weight†7th Edition Volume 1 CSS, London, Pp 123 & 308.Gregory, A (1987), “Construction of Door†onward Book, Second Edition, London PP 7-11Olagoke S.A (2006), “Properties of material†Second Edition, SAO Multi-ventures, Ibadan Nigeria. Pp. 4Adebayo I.A and Garuba A.O (2008), Fabrication of Twin Panel Metal Door, ND Project Report, metallurgical EngineeringAbdulqadri BL (2010) Strength of materials, SMS publisher prin ... Continue reading---
-
ABSRACT - [ Total Page(s): 1 ]ABSTRACTPrivacy and security are major essential human needs in various houses, offices etc. ability to afford quality door and high long life span at an affordable price to an average Nigerian has been a problem. This project is aimed at fabrication of a double panel door which is capable of giving maximum security to life and properties. The locally available material (mild steel) of different shapes, sizes and forms was used with available indigenous technology without compromising the standa ... Continue reading---