• ANALYSIS OF PROPERTIES OF KAOLIN DEPOSITS IN NIGERIA
    [CASE OF STUDIES OF KPANKOROGI AND IJERO-EKITI]


  • You can get the complete material / full content @ a service support fee of ₦4,500.00(10-USDT) only

    Download This Material Now !!

    • ABSRACT - [ Total Page(s): 1 ]ABSTRACTThis study considered the mineralogical, elemental composition in form oxides and engineering properties such as particle size, specific gravity, bulk density; water content and atterberg limits of two kaolin deposits in Kpankorogi in Edu Local Government of Kwara State and in Ijero-Ekiti in Ijero-Ekiti Local Government Area, Ekiti State.This is  with a view to assessing their potentials for Various industrial applications. The analyses includes X-Ray Diffraction (XRD and X-Ray Fluorescence(XRF). It was observed that the kaolin sample from Kpankorogi is dominated by Quartz and the one ... Continue Reading

         

      LIST OF TABLES - [ Total Page(s): 1 ]LIST OF TABLESTable 4.1:    Engineering and physical properties of the samples  Table 4.2:    Grain Size Analysis of the samples    Table 4.3:    Chemical composition of the Samples   Table 4.4:    Mineralogical components of the Samples Table 4.5      Major elemental oxides tested by kaolin sample compared with  chemical and industrial specifications  ... Continue Reading

         

      LIST OF FIGURES - [ Total Page(s): 1 ]LIST OF FIGURESFig. 3.1:      Map of Nigeria Showing Kwara and Ekiti States   Fig. 3.2:      Map of Ekiti State indicating the study Area A            Fig. 3.3:      Map of Kwara State indicating the Study Area B            Fig. 4.1:    X-ray Diffractogram of Kpankorogi Kaolin Sample  Fig.4.2:    X-ray Diffractogram of Ijero-Ekiti Kaolin Sample  ... Continue Reading

         

      TABLE OF CONTENTS - [ Total Page(s): 1 ]TABLE OF CONTENTSTitle Page   Certification        Dedication   Acknowledgement      Abstract        Table of Content      List of Tables     List of Figures                                                 CHAPTER ONE                                                                                1.0    Introduction  1.1   Aim and Objectives of the Study   1.2   Scope and Limitation of the Study      1.3   Research Justification ... Continue Reading

         

      CHAPTER ONE - [ Total Page(s): 2 ]CHAPTER ONE1.0                                                   Introduction       Kaolin is a clay rock and part of the group of industrial minerals with the chemical composition (Al2Si205 (OH)4.It is a layered silicate mineral with one tetrahedral sheet linked through oxygen atoms to one octahedral sheet alumina i.e. structurally composed of silicate sheet (Si2O¬5) bonded to aluminum oxide/hydroxide layer Al2 (OH)4 called gibbsite layers and repeating layer of the mineral are hydrogen bonded together. (Rost, 1992; Bish, 1993; Klein ... Continue Reading

         

      CHAPTER TWO - [ Total Page(s): 2 ]Kaolin also finds application as crystal to promote organic reactions, such as petroleum cracking or de-polymerization of large organic molecules found in natural hydrocarbons as demonstrated by (Iglewe and Nwokolo, 2005).The grain size and shape of kaolin is used to advantages in the paper industry, where it is used both as a filling agent and as coating agent also printing inks tend to adhere better to kaolin –treated paper surface (Velde, 1992, Aliyu, 1996).      Both grain and shape are useful properties in production of various types of plastic and rubber products for instance ... Continue Reading

         

      CHAPTER THREE - [ Total Page(s): 6 ]CHAPTER THREE3.0                                 Materials and Methods3.1     Description of the Studies AreasKaolin samples were collected from two different locations namely: kpankorogi and ijero Ekiti.Kpankorogi in Edu local government area of Kwara State is located in northern part of Kwara state on latitude 08052’38-6’’N and longitude 04059’55.5’’E at 72KM distance from Ilorin, the state capital. The Kpankorogi area enjoys tropical climate marked by alternating raining and dry season and a mean annual rainfall o ... Continue Reading

         

      CHAPTER FOUR - [ Total Page(s): 5 ]The result of the oxide analysis is presented in the table 4.3. Elemental oxides found in the Samples are SiO2, Al2O3, Fe2O3, TiO2, MnO, CaO, MgO, K2O, Na2O, CuO, ZnO, Cr2O5, V2O5 and Se2O3, Table 4.5 shows the requirement and industrial specification. SiO2 of both Samples can be used in refractory bricks, ceramics, Al¬2O3 meets the requirement for refractory bricks, ceramics, and coating, TiO2 meets the range and can be used in  refractory bricks, rubber, ceramics, and bricks clay, CaO meets the requirement in refractory bricks, rubber, ceramics and bricks clays, K2O only Sample A meets t ... Continue Reading

         

      CHAPTER FIVE - [ Total Page(s): 1 ]CHAPTER FIVE5.0                             Conclusion and Recommendations5.1    ConclusionCompositional features and industrial applications of Kpankorogi and ijero Ekiti kaolin clay were analyzed based on mineralogy, Chemical composition and physical characteristics of the deposits. This is with the view to determining its suitability as industrial raw material. From the study, it is Obtained that kpankorogi kaolin clay deposit is predominantly Quartz but with high SiO2 and Al2O3 contents, while Ijero-Ekiti kaolin clay deposit is predominantly orthoclase with h ... Continue Reading

         

      REFRENCES - [ Total Page(s): 1 ]ReferencesAderiye, J.(2005). Development of firebricks for furnances. M.Sc. Thesis, Acta 60 (4), 553–564. ADONDUA, S (1988). Indigenous Refractory Raw Materials Base for Nigerian                            Steel Industry Journal of the Nigerian Society of Chemical Engineers (NSCHE), (7): 2, pp. 322-327. Aliyu, A. (1996): Potentials of the Solid Minerals Industry in Nigeria Abuja: RMDC. Pp. 1-40, 63 – 83, 164 – 172 Aref, A. (2009): Characterization and Evaluation of Alga Deposit of Yemen.Bailey S.W. (1980). Summary of recommendations of Mineral ... Continue Reading