Investigation Of Effects Of Alum And Potassium Sesquicarbonate On The Fire Characteristics Of Flexible Polyurethane Foam

REFERENCES

T.W Solomon Graham (1980), Organic Chemistry 2nd ed. John Wiley and Sons, Toronto, pp 334 – 339.

C.J. Benning (1969), Plastic Foams, The Physical and Chemistry of Product Performance and Process Technology, Vol. I, Chemistry and Physics of Foams Formation, John Wiley and Sons, New York, pp 235-247

R.G Gann (1993), Flame Retardants Overview, Kirk- Othmer Encyclopaedia of Chemical Technology, 4thed. John Wiley and Sons New York, pp 930-936.

S.L. Levan (1970), The Chemistry and Use of Fire Retardants, Wiley Interscience, New York, p. 540.

A. Pettigrew (1993), Halogenated Flame Retardants, Kirk- Othmer Encyclopaedia of Chemical Technology, 4th ed,

John Wiley and Sons, New York, pp 954 - 976.

T.U Onuegbu, O. Oganfeyitimi, V.I.E Ajiwe (2007), Local Raw Material as Filler in Flexible Polyurethane Foam, Anachem Journal, Vol. 1 & 2, pp 1-7.Oerter Gunter (1985), Polyurethane Handbook. Macmillian Publishing Co. Inc, New York, p 232

R.R Hindersinn (1990), Historical Aspects of Polymer Fire Retardance, Fire and Polymer Hazards; Identification and Prevention: American Chemical Society, New York, (ACS Symposium Series no 415)

E. Osabohien, O. Anomohawan and S. Egboh (2007), Thermal Conductivity and Equilibrium Swelling Properties of Natural Rubber filled with Welders Used Carbide Waste, J. Chem. Soc. Nigeria, 32 (2), 234 - 239.

J.C. Green (1992), The Phosphorous Content of Flame Retardant, 2nded, Oxford University Press, London, pp 470 - 487

E.D. Weil (1993), Phosphorous Flame-Retardants, Kirk- Othmer Encyclopaedia of Chemical Technology, 4th ed. John Wiley and Sons, New York, pp 916-998

E.R. Larson (1990), Halogenated Flame Retardant, Dow Chemical, USA, pp 373-395

C.F. Cullis (1987). Bromine Compounds as Flame- Retardants, Proceedings of the International Conference on Fire Safety, Vol. 12, pp 307-323

I. Touval (1993), Antimony and Other Inorganic Flame Retardants, Kirk-Othmer Encyclopaedia of Chemical Technology, 4th ed. John Wiley & Sons, New York, pp 36­954

A.N. Eboatu (1992), Fire, Flammability and Fire Fighting, Anchor Educational Publisher, Lagos, pp 25-35

R.H. Dahms (1973), How to Prevent Plastic Fires with Retardants, Fire Protection Manual for Hydrocarbon Processing Plant, Gulf Publishing Company, Texas, pp 177-182

A.G. Ulsamer, R.E. Osterberg (1980), Flame Retardant Chemicals in Textiles. Noyes Publication, New Jersey, pp 101- 131

A.N. Eboatu (1998), Studies on the Chemical Finishing of Cellulosic Fabrics, Nig. J. Basic and Appl. Sci, pp 23-30

J.J. Pitts, W.C. Kuryla (1973), Flame Retardancy of Polymeric Materials, Weinheim Publishers, Germany, pp 459-507

I.O. Akpabio and A. Jauro (2002), Effects of Mixed Flame Retardants on the Combustion Characteristics of Woods Cellulose. J. Chem. Soc. Nigeria, Vol. 27 (1), pp 20-23

M. Ash and I. Ash (1991), Concise Encyclopaedia of Industrial Chemical Additives, Holder and Stoughton Ltd. England, pp 208-209.

M.A. Khattah, S.H. Kandil, A.M. Gad (1992). Effects of Condensed Phase Flame-Retardants on the Ignition Behavior of Cotton Fabrics Fire and Materials, p 1

B. Garba and A.N. Eboatu (1990), Effect of Flame Retardants Treatment on the Thermal Behavior of some Tropical Timbers. J. Appl. Polym. Sci, p 109

P.F. Ranken (2000), Flame Retardants Plastics Additives Handbook 5th ed. Haris Tweifel Hanser, India, pp 305­306

D.W. Connel (1997), Basic Concept of Environmental Chemistry, Lewis Publishers, New York, pp 167- 175.

T.A. Calamari, R.J. Harper (1993), Flame Retardants for Textiles, Kirk-Othmer Encyclopaedia of Chemical Technology, 4th ed. John Wiley and Sons, New York, pp

998 - 1022

T. Morikawa and T.O. Kada (1995), Toxicity Gases from full-scale room Fires involving Fire Retardant Contents, Stanford Publishers, Connecticut, p 16

S.C. Brown and M.J. Herbert (1972), New Development in ATH Technology and Applications. Stanford Publishers, Connecticut. P 40

T.A. Howells (2007), Flame Proofing, McGraw Hill Encyclopedia of Science and Technology, Vol. 1, p 53

J.M. Avento and I. Touval (1980), Flame Retardants, an Overview Kirk- Othmer Encyclopaedia of Chemical Technology, John Wiley and Sons, New York, pp 312-372

M. Algar (1997), Polymer Science Dictionary Chapman, London, pp 199-200

V.I.E. Ajiwe, C.W. Ulakpa, and T.U. Onuegbu (2005), Additives Effects on Production of Polyurethane Flexible Foam World Journal of Biotechnology, Vol.2 pp 957- 967.

J. Brian (2000), Polyurethane Chemistry and Calculations, Interbru Publishers, London, p 2

R.J. Fried (2005), Polymer Science and Technology, Pearson Education Inc. New Jersey, pp 373

W. Kaminsky and M. Arndt (1997), Advanced Polymer Science. Prentice Hall, India, pp 127, 144

I. Rubin (1990), Hand Book of Flexible Foam Manufacture, Wiley Inter Science Publishers, New York, pp 11-35

Z. Wirspsza (1993), Polyurethanes: Chemistry Technology and Applications, Ellis Harwood London, p 402

W. Billmeyer (1984), Textbook of Polymer Science, Wiley Inter-science, New York, pp 447

J.H. Saunder (1960), The Formulation of Urethane Foam, Rubber Chemicals and Technology Publishers, New York, pp 1239-1322

F.M. Herman, G.N. Gaylord and N.M.B. Kales (1982), Encyclopaedia of Polymer Science Wiley Inter-science, New York, pp 352-355

M. Grayson (1989), Kirk-Othmer Encyclopaedia of Chemical Technology, 3rd ed. Wiley Inter-science, New York, pp 101-102

J.K. Backus (1977), “Polyurethanes” in Polymerization Processes, Wiley Inter-science, New York, pp 203-204

B. Raymond, B. George, and T. Kaufman (1992), Polyurethanes; A Class of Modern Versatile Materials. J. Chem. Ed., pp 69, 909

C.J. Benning (1969), Plastic Foams, The Physics and Chemistry of Product Performance and Process Technology. Vol. 1, Chemistry and Physics of Foam Formulation, John Wiley and Sons, New York, pp 235 - 247

S. Gross (1969), Modern Plastics Encyclopaedia, Vol. 46 McGraw Hill Publishers, New York, p 248

C. Valentine, J.A. Craig and S.L. Hager (1993), Inhibition of the Discoloration of Polyurethane Foam caused by Ultra Violet Light. McGraw Hill, New York, pp 569- 590

G. Blair, B. Dawe, J. McEvoy and C. Wright (2007), The Effect of Visible Light on the Variability of Flexible Foam Compression Sets. Technomic Publishing Company, Pennsylvania, pp 420-424

D.C. Allport and W.H. James (1973), Block Polymers, Applied Publishers, London, pp 57-65

F. Rodriguez (1987), Principles of Polymer System McGraw Hill Block Company, London, pp 362 - 464

E.N. Doyle (1971), The Development and Use of Polyurethane Products. McGraw Hill Publishers, New York, pp 7-10

T.U. Onuegbu, C.C. Ezenduka, and O. Oganfeyitimi (2008), Natural Cellulosic Material as Filler in Flexible Polyurethane Foam, Delta Chem Journal, pp 23-28

A.C. Hampel and G.G. Hawley (1973), The Encyclopaedia of Chemistry, Van Nostrand Reinhold Company, New York, pp 130-132

S.P. Parker (1994), Concise Encyclopaedia of Science and Technology, McGraw Hill, Inc., U.S.A, 3rd ed. pp 76,768

S.P. Parker (1997), Encyclopaedia of Science and Technology, McGraw Hill, Inc., U.S.A, 8the d. Vol. 1, pp 522 - 523 and Vol. 7, pp 57 – 88

J. Krasny, J. William (2001), Fire behaviour of upholstered furniture and mattresses. Noyes Publication, New York, pp. 31-32

T.U. Onuegbu, A.N Eboatu and I.J Dioha (2007), Reducing Fire Risks in Recycled Low Density Polyethylene, Anachem Journal, Vol. 1, pp 58 - 63.

Encyclopaedia of Chemical Techn. Vol. 10, pp 2100 - 2196.

F. Ward (1955) J. Soc. Dyers and Colourists II, pp 559.

J. Wyld (1735) Brit. Pat. No. 551.

M. Lewin and S.B. Sello (1979) Flame Retardant Polyermeric Materials Vol. I, PLENUM, N.Y. 3291975.

C.J. Hiledo (1969) Flammability Hand Book, Technomic Publishing Company, Stanford, Conneticut. pp 500.

A.R. Horrocks (1986), Polymer Degradation and Stability, Rev. Progress in Coloration, ISDC, 16, 62.