-
Determination Of Labour Output On Windows And Doors Fixing
-
-
-
A major element in the success of the construction industry is the accuracy in construction project estimates. Previous researches have shown that most of the output constants used by estimators in the Nigerian construction industry are either derived from experience or are remnants of British colonial heritage. Hence, non-uniform outputs are widely used. The research is aimed at using work study approach to empirically establish labour output for doors and windows fixing in the Nigerian construction industry. A total of 30 construction sites were observed, 15 each for Kano and Jigawa States for three sizes of doors and three sizes of windows. The data collected were analyzed using inferential statistical analysis. The results of the analysis carried out established general average output values per day of; 12.00 nr, 13.00 nr and 16.00 nr casement windows sizes 1500 x 1200mm, 1200 x 1200mm and 600 x 600mm respectively. While 11.00 nr, 10.00 nr and 11.00 nr steel doors were established for sizes 1200 x 2100mm, 900 x 2100mm and 750 x 2100mm respectively. A two-tailed t-test analysis was used in assessing the influence of the labour productivity factors on the output of the workers observed. The inferential analysis revealed that mode of employment and experience, significantly affected workers output. Also the findings should serve as an effective baseline for contractors to exploit the output figures extracted according to productivity factors in order to optimize the productivity of their workers and profitability.
-
-
-
CHAPTER ONE - [ Total Page(s): 1 ]CHAPTER ONEINTRODUCTION1.1 BACKGROUND OF THE STUDYThe
efficiency of the construction industry is heavily reliant on its level
of productivity. As noted by Adnan et al(2007), until the productivity
level of construction activities is improved, the nation’s economy will
continue to suffer setbacks. Hence, improving productivity has become a
major concern of every profit-oriented organisation (Adnan et al,2007).
An important component of the construction ... Continue reading---
-
CHAPTER ONE - [ Total Page(s): 1 ]CHAPTER ONEINTRODUCTION1.1 BACKGROUND OF THE STUDYThe
efficiency of the construction industry is heavily reliant on its level
of productivity. As noted by Adnan et al(2007), until the productivity
level of construction activities is improved, the nation’s economy will
continue to suffer setbacks. Hence, improving productivity has become a
major concern of every profit-oriented organisation (Adnan et al,2007).
An important component of the construction ... Continue reading---
ABSRACT -- [Total Page(s) 1]
Page 1 of 1
ABSRACT -- [Total Page(s) 1]
Page 1 of 1